AT Mount Replacement (Front Mount Replacement)

Removal Procedure

^ Tools Required
- J28467-A Universal Support Fixture

1. Install the engine holding fixture tool J28467-A.
2. Raise the vehicle.
3. Remove the right hand and left hand splash shields.
4. Remove the 2 bolts from the front transaxle mount.
5. Remove the front transaxle mount through bolt
6. Remove the insulator to the mount bracket.
7. Remove the 2 front transaxle bracket bolts and bracket from the transaxle.

Installation Procedure
1. Install the front transaxle bracket and bolts.
^ Tighten the transaxle bracket bolts to 60 Nm (44 ft. lbs.)
2. Install the insulator to the mount bracket.
3. Install the front transaxle mount through bolt.
^ Tighten the transaxle mount through bolt to 60 Nm (44 ft. lbs.)
4. Install the 2 bolts to the front transaxle mount.
^ Tighten the front transaxle mount bolts to 60 Nm (44 ft. lbs.)
5. Install the left hand and right hand splash shields.
6. Lower the vehicle.
7. Remove the J28467-B engine holding fixture tool.