Overhaul Procedure Steps

NOTE: This article lists the sequential steps necessary to overhaul the transmission.
^ For the specific step listed below, refer to that step under "Repair Instructions".
^ For the complete list of procedures, refer to "Repair Instructions".




Overhaul Procedure:


[ ] Torque Converter Inspection
[ ] Oil Pump Seal Replacement
[ ] Transaxle Disassemble
[ ] Oil Pump Disassemble

[ ] Direct Clutch Overhaul
[ ] Forward Clutch Overhaul
[ ] #1 One-Way Clutch and Sun Gear Overhaul
[ ] #2 One-Way Clutch and Rear Planetary Gear Overhaul

[ ] 1ST and Reverse Brake Piston Overhaul
[ ] Intermediate Shaft Front Bearing Overhaul
[ ] Valve Body Removal
[ ] Upper Valve Body Overhaul

[ ] Lower Valve Body Overhaul
[ ] Valve Body Installation
[ ] Differential Case Disassemble
[ ] Differential Case Assemble

[ ] Drive Pinion Shaft Removal
[ ] Drive Pinion Shaft Overhaul
[ ] Oil Seal and Outer Race Replacement
[ ] Differential Adjustment

[ ] Drive Pinion Shaft Installation
[ ] Transaxle Assemble