HVAC System - Manual

Blower Switch Replacement

REMOVAL PROCEDURE
1. Remove the center console trim bezel.
2. Remove the blower speed selector switch knob by pulling the knob away from the HVAC control unit.
3. Remove the two screws (5) and pull the HVAC control unit (4) forward.
4. Remove the illumination bulbs (2).
5. Disconnect the blower speed selector switch electrical connector.
6. Disconnect the A/C switch electrical connector.
7. Remove the two screws (1) and the blower speed selector switch (3) from the HVAC control unit.

INSTALLATION PROCEDURE
1. Install the blower speed selector switch (3) to the HVAC control unit (4). Secure the blower speed selector switch with the two screws (1).
2. Install the illumination bulbs.
3. Connect the A/C switch electrical connector.
4. Connect the blower speed selector switch electrical connector.
5. Install the HVAC control unit (4) to the instrument panel. Secure with the two screws (5).
6. Install blower speed selector switch knob.
7. Install the center console trim bezel.