Brake Lathe Information

Ammco Brake Lathe
Spindle Speed:
Rough Cut 200 RPM
Finish Cut 200 RPM
Depth Of Cut:
Rough Cut 0.127 mm (0.005 inch)
Finish Cut 0.051 mm (0.002 inch)
Total Cross Feed (Per Revolution):
Rough Cut 0.152-0.254 mm (0.006-0.010 inch)
Finish Cut 0.051 mm (0.002 inch) Max.
Vibration Damper:
Rough Cut Yes
Finish Cut Yes
Swirl Pattern - 120 Grit:
Rough Cut No
Finish Cut Yes
Accu-Turn Brake Lathe, Dealer Equipment (One Cut Refinish Procedure)
Spindle Speed 200 RPM
Tool Cross Feed (Per Revolution) 0.076 mm (0.003 inch)
Tool Bit Nose Radius 1/64
Vibration Damper Yes
Swirl Pattern - 120 Grit Yes