Brake Caliper Bracket Replacement

REMOVAL PROCEDURE
1. Remove the brake pads.
2. Remove 2 bolts and the caliper carrier from the vehicle.





3. Remove 2 caliper pins, with the boots, from the caliper carrier (1).

INSTALLATION PROCEDURE
1. Lubricate the caliper pins with silicone grease.
2. Install 2 caliper pins, with the boots, to the caliper carrier.

NOTICE: Refer to Fastener Notice in Service Precautions.





3. Install the caliper carrier (1) to the vehicle. Secure the carrier with 2 bolts.
^ Tighten the caliper carrier bolts to 40-60 Nm (29-43 lb ft).

4. Install the linings.