Rear

REMOVAL PROCEDURE





1. Raise and support the vehicle. Refer to Vehicle Lift Points.
2. Remove the tire and wheel assemblies. Refer to Tire and Wheel Removal and Installation in Wheels, Tires and Alignment.
3. Remove the stabilizer shaft link nuts from the stabilizer shaft.
4. Remove the stabilizer shaft clamps, bolts and nuts retaining the shaft to the crossmember.
5. Remove the stabilizer shaft from the vehicle.
6. Remove the stabilizer shaft insulators from the stabilizer shaft.

INSTALLATION PROCEDURE





1. Install the stabilizer shaft insulators to the stabilizer shaft.
2. Install the stabilizer shaft to the vehicle.
3. Install the stabilizer shaft insulator clamps to the stabilizer shaft and the crossmember.

NOTICE: Refer to Fastener Notice in Service Precautions.

- Tighten the stabilizer shaft insulator clamp bolts to 65 Nm (49 ft. lbs.).

- Tighten the stabilizer shaft insulator clamp nuts to 95 Nm (70 ft. lbs.).

3. Install the stabilizer shaft links to the stabilizer shaft.

- Tighten the stabilizer shaft link nuts to 72 Nm (53 ft. lbs.).

4. Install the tire and wheel assemblies. Refer to Tire and Wheel Removal and Installation in Wheels, Tires and Alignment.
5. Lower the vehicle.