Manual Transmission Fluid Level Check (Domestic)

Inspection Procedure





1. Raise and suitably support the vehicle; ensure that the vehicle is level. Refer to Vehicle Lifting.
2. Clean any dirt from around the fill plug.
3. Remove the fill plug from the transmission.
4. Check that the transmission fluid level is even with the bottom of the fill plug hole.
5. Add Dexron(R) III transmission fluid, if necessary.

Notice: Refer to Fastener Notice in Service Precautions.

6. Install the fill plug to the transmission.
^ Tighten the manual transmission fill plug to 27 Nm (20 ft. lbs.).
7. Lower the vehicle.