Power Steering Return Hose Replacement (Pipe)

REMOVAL PROCEDURE





1. Remove the power steering pressure hose (3) from the power steering pressure pipe (4).
2. Remove the power steering pressure pipe (4) from the power steering pump (1).
3. Remove the power steering pressure pipe (4) from the vehicle.

INSTALLATION PROCEDURE





1. Install the power steering pressure pipe (4) to the vehicle.

NOTICE: Refer to Fastener Notice in Service Precautions.

2. Install the power steering pressure pipe (4) to the power steering pump (1).
Tighten the fitting to 27 Nm (20 ft. lbs.).
3. Install the power steering pressure hose to (3) to the power steering pressure pipe (4).
Tighten the fitting to 27 Nm (20 ft. lbs.).
4. Bleed the power steering system. Refer to Bleeding Power Steering System in Service and Repair of Steering.