Balance Shaft

TIGHTENING SPECIFICATIONS
Shaft to Housing Bolts 8 mm hex 10 Nm (89 inch lbs.)+45°
Housing Bolts 10 mm hex 15 Nm (11 ft. lbs.)+40°
Shaft to Block Bolts 13 mm hex 25 Nm (18 ft. lbs.)
Shaft to Block Bolts 15 mm hex 53 Nm (39 ft. lbs.)
Shaft to Block Bolts 18 mm hex 40 Nm (30 ft. lbs)+60°
Cover Nut and Bolt 13 Nm (115 inch lbs.)
Shaft to Crankshaft 175 Nm (129 ft. lbs.)+90°
Housing to Thrust Plate 13 Nm (115 inch lbs.)

DIMENSIONS
Housing Flatness Maximum 0.076 mm (0.0030 inch)
Bore Roundness 0.025 mm (0.0009 inch)
Bearing Thickness 1.500-1.508 mm (0.0590-0.0593 inch)
Bearing I.D. 30.019-30.061 mm (1.1819-1.1835 inch)
Housing Bore 33.025-33.050 mm (1.3001-1.1801 inch)
Shaft Journal O.D. 29.950-29.975 mm (1.1791-1.1801 inch)
Journal Taper 0.000-0.010 mm (0.000-0.0004 inch)
Journal Roundness Maximum 0.005 mm (0.0002 inch)
Shaft Groove Width 3.23-3.40 mm (0.127-0.134 inch)
Thrust Plate Thickness 2.945-3.045 mm (0.1159-0.1199 inch)
Endplay 0.185-0.455 mm (0.0073-0.0179 inch)