Transmission Case

^ Tools Required:
- J 8092 Drive Handle
- J 23907 Slide Hammer
- J 39439-2 Bushing Remover
- J 39790 Mainshaft Bearing Race Remover
- J 39791 Countershaft Beating Race Remover





1. Remove the oil fill plug.





2. Remove the backup lamp switch.





3. Remove the dowel pins.

Important: Do not replace the bearing race unless inspection shows bearing race damage.





4. Remove the countershaft bearing race. Use the J 8092 with the J 39791.

Important: Do not replace the bearing race unless inspection shows bearing race damage.





5. Remove the mainshaft bearing race. Use the J 8092 and the J 39790.





6. Remove the 1ST/2ND and the 3RD/4TH shift shaft bushings. Use the J 23907 and the J 39439-2.