Reverse Lockout Assembly Disassemble

Caution: The reverse lockout assembly is under spring pressure. Exercise caution when removing the retainer ring, as bodily injury may result. Disassemble the reverse lockout assembly in the following sequence:

1. Remove the O-ring from the body.
2. Remove the retainer ring from the body.
3. Remove the reverse lockout inner spring.
4. Compress the reverse lockout plunger and the collar in a vise and remove the retainer ring.
5. Remove the reverse lockout plunger.
6. Remove the reverse lockout outer spring.
7. Remove the reverse lockout collar.