Front or Rear Turn Signal Lamps Not Flashing

TURN SIGNAL BULB BURNED OUT.
^ Replace the bulb.
BULB SOCKET HAS HIGH RESISTANCE TO GROUND.
^ Diagnose electrical circuit and/or replace the flasher unit.
LOOSE CHASSIS TO COLUMN CONNECTOR.
^ Inspect the chassis to column connector.
^ Repair/replace components as needed.
TURN SIGNAL SWITCH IS FAULTY.
^ Check by substitution.
1. Disconnect switch to harness connector (below column).
2. Connect new switch and operate by hand.
3. If lights not operate normally, switch is faulty.
4. If lights fail to operate, repair or replace as needed.