J. Shifter

INSTALL OR CONNECT
1. Shifter (96).
- Apply sealant GM P/N 12345739 at extension housing to shifter mating surface.
2. Bolts (97).

Tighten
- Bolts (97) to 20 N.m (15 lb. ft.).

3. Remove transmission from J 39430 and J 3289-20.
4. Clutch fork (164) and T-handle (165).
5. Clutch fork bolt (166).
- Apply sealant GM P/N 12345382 to threads of clutch fork bolt (166).

Tighten
- Bolt (166) to 25 N.m (18 lb. ft.).

6. Clutch housing (162).
7. Clutch housing bolts (163).

Tighten
- Bolts (163) to 35 N.m (26 lb. ft.).

8. Vent tube (161).