Cooler Gasket

NOTE: The outlet tank must be removed to replace the transmission oil cooler but the transmission oil cooler gasket can be replaced without removing the outlet tank.

1. Remove radiator. See Cooling System.
^ Lay radiator on flat surface.
2. Remove bottom transmission oil cooler pipe and loosen top pipe connection.





3. Press transmission oil cooler into hole and remove gasket using small hook.
4. Blow dry all surfaces on outlet tank and transmission oil cooler.
5. Stall new transmission oil cooler gasket without lubrication.
^ Be sure gasket is properly seated inside lip of fitting.
6. Reach into inlet or outlet opening and push transmission oil cooler into position against outlet tank.
7. Install transmission oil cooler pipe loosely. To replace other gasket, follow previous steps in order. Tighten transmission oil cooler pipe fittings to 27 Nm (20 ft. lbs.). Do not overtighten.
8. Leak test radiator. See Cooling System.
9. Install radiator. See Cooling System.