Clutch Pedal Position Switch (Clutch Start Switch)

REMOVE OR DISCONNECT

CAUTION: Before removing or installing any electrical unit or when a tool or equipment could easily come in contact with "live" exposed electrical terminals, disconnect the battery negative cable assembly to help prevent personal injury and/or damage to the vehicle or components. Unless instructed otherwise, the ignition switch must be in the "OFF" or "LOCK" position.

1. Battery negative cable.
2. Instrument panel driver knee bolster.
3. Clutch pedal position switch harness electrical connector from clutch pedal position switch (28).
4. Clutch pedal position switch (28) from brake and accelerator and clutch pedal (with bracket) (16).

INSTALL OR CONNECT
1. Clutch pedal position switch (28) to brake and accelerator and clutch pedal (with bracket) (16).
2. Clutch pedal position switch harness electrical connector to clutch pedal position switch (28).
3. Instrument panel driver knee bolster.
4. Battery negative cable.