Throttle Body Cable Replacement

NOTE: The adjuster assembly adjustment procedure must be followed each time the throttle body cable is removed and replaced to ensure optimum system performance.

REMOVE OR DISCONNECT
1. Throttle body cable routing clips.
2. Throttle body lever shield attaching screw and shield.
3. Cable from throttle body.

Adjuster Assembly Splash Cover:

4. Adjuster assembly splash cover.
5. Adjuster assembly cable cam cover.

Adjuster Assembly - Accelerator And Cruise Control:

6. Cable from adjuster assembly.

INSTALL OR CONNECT
1. Cable to adjuster assembly.
2. Adjuster assembly cable cam cover.

Adjuster Assembly Cable Locations:

3. Adjuster assembly splash cover. Adjust Accelerator and cruise control cables.
4. Cable to throttle body.
5. Throttle body lever shield attaching screw and shield.
6. Throttle body cable routing clips. Tighten Throttle body lever shield attaching screw to 2 Nm (18 inch lbs.)