Customization Charts

EXIT LIGHTING AND DELAYED ILLUMINATION
Exit lighting illuminates interior lamps when the key is removed from the ignition switch to help in exiting the vehicle. Delayed illumination illuminates interior lamps for 25 seconds after the doors are closed. The 25 seconds is shortened if the ignition is turned on or if the power locks are activated. Both exit lighting and delayed illumination are enabled from the factory, and can be disabled if desired.

1. Enter programming mode. Refer to "Programming Mode".
2. Turn courtesy lamp switch ON then OFF (I/P dimmer switch, not parking lamps).
^ Listen to number of chimes to determine current setting.
- Factory setting in bold face print.

Exit Lighting And Delayed Illumination:

3. Turn the courtesy lamp switch from ON and OFF to increment desired setting above Chart.
4. Continue customizing other features or exit programming mode. Refer to "Programming Mode".

LAST DOOR CLOSED LOCKING AND LOCKOUT PREVENTION
Last door closed locking is available on cars with power locks, this feature provides for delayed locking of the doors (3 seconds after the last door is closed). This allows the driver or passengers to exit the vehicle after the driver's power door lock switch is pressed and still have the doors remain locked after exiting. When the locked switch is pressed, the chime will sound three times, indicating a last door closed locking is pending. Pressing the lock switch again will lock the doors immediately. Pressing the unlock switch will cancel a pending last door closed locking. Last door closed locking is disabled from the factory, and can be enabled if desired.

Lockout prevention protects the driver from locking the keys in the vehicle, this feature disables the power locks from locking when the keys are in the ignition and a door is open. If the power lock button is pressed when a door is open, the chime will sound 5 times as a reminder to take the keys before locking the door. Lockout prevention is enabled from the factory, and can be disabled if desired.

1. Enter programming mode. Refer to "Programming Mode".
2. Press the lock switch on the door.
^ Listen to number of chimes to determine current setting.
- Factory setting in bold face print.

Last Door Closed Locking And Lockout Prevention:

3. Press the lock switch on the door to increment desired setting above.
4. Continue customizing other features or exit programming mode. Refer to "Programming Mode".

REMOTE LOCK CONTROL VERIFICATION (HORN CHIRP AND PARKING LAMPS FLASH)
Available on vehicles equipped with Universal Theft Deterrent (UTD) system, this feature provides horn chirps and/or parking lamp illumination to indicate that the remote transmitter "LOCK" or "UNLOCK" command was received.

1. Enter programming mode. Refer to "Programming Mode".
2. Press the unlock switch on the remote transmitter. Listen to number of chimes to determine current setting.
- Factory setting in bold face print.

Remote Lock Control Verification:

3. Press the unlock switch on the remote transmitter to increment desired setting below.
4. Continue customizing other features or exit programming mode. Refer to "Programming Mode".

THEFT DETERRENT ARMING METHOD
Available on vehicles equipped with Universal Theft Deterrent (UTD)) system, this feature provides different methods of arming the UTD system.

1. Enter programming mode. Refer to "programming Mode".
2. Press the unlock switch on the door.
^ Listen to number of chimes to determine current setting.
- Factory setting in bold face print.

Theft Deterrent Arming Method:

3. Press the unlock switch on the door to increment desired setting below.
4. Continue customizing other features or exit programming mode. Refer to "Programming Mode".

THEFT DETERRENT ARMING VERIFICATION (HORN CHIRP AND PARKING LAMPS FLASH)
Available on vehicles equipped with Universal Theft Deterrent (UTD) system, this feature provides horn chirps and/or parking lamp illumination to indicate when the UTD system has armed. it is programmed separately from the remote lock control verification listed above.

1. Enter programming mode. Refer to "Programming Mode".
2. Press the lock switch on the remote transmitter.
^ Listen to number of chimes to determine current setting.
- Factory setting in bold face print.

Theft Deterrent Arming Verification:

3. Press the lock switch on the remote transmitter to increment desired setting above.
4. Continue customizing other features or exit programming mode. Refer to "Programming Mode".

THEFT DETERRENT OPERATION (DRIVER'S DOOR DELAY AND SHOCK SENSOR ENABLE)
Available on vehicles equipped with Universal Theft Deterrent (UTD) system, this feature provides a driver's door delay that can be set at zero or eight seconds from the time the driver's door is opened until the alarm sounds. The shock sensor feature, that detects sharp blows to the vehicle, can also he enabled or disabled using this chart. Refer to "System Components" for a description of the two sensitivity levels and adjustment procedure.
1. Enter programming mode. Refer to "Programming Mode" in this section.
2. Turn the parking lamps ON and OFF
^ Listen to number of chimes to determine current setting.
- Factory setting in bold face print.

Theft Deterrent Operation:

3. Turn the parking lamps ON and OFF to increment desired setting below.
4. Continue customizing other features or exit programming mode. Refer to "Programming Mode".