Service Procedure

1. Open hood and locate the caution label positioned on the radiator surge tank attachment bracket (see illustration).

NOTICE:
DO NOT ATTEMPT TO INSTALL NEW LABEL WHEN SURGE TANK IS HOT.

2. Using a clean, dry cloth, wipe dirt, oil, etc. from existing caution label on the radiator surge tank attachment bracket.

NOTICE:
THE LOWER PORTION OF THE NEW LABEL MAY BE CUT OFF (SEE ILLUSTRATION) TO ALLOW EASIER INSTALLATION.

3. Remove backing from new label and apply over existing caution label.

4. Beginning at center of label, and using a clean, dry cloth, smooth and secure new label. Any air bubbles can be removed by puncturing with a pin and smoothing with the cloth.

NOTICE:
DO NOT ATTEMPT TO REMOVE OR LOOSEN NEW LABEL ONCE IT HAS BEEN APPLIED AS THIS WILL DEFACE THE LABEL.

5. Install Campaign Identification Label.