EGR Electronic Vacuum Regulator Solenoid: Service and Repair

EGR Vacuum Control Signal Solenoid Valve Replacement

Removal Procedure

Notice: Numbers in text correspond to numbered components in image.

1. Disconnect the electrical connector at the solenoid valve (1).

2. Disconnect the vacuum hose harness (3).

3. Remove the Nut and solenoid valve (1) from the intake manifold (4).

Installation Procedure

1. Install the solenoid valve (1) and bracket to the intake manifold (4). Tighten the nut to 34 Nm (25 lb ft).

2. Connect the vacuum hose harness (3).

3. Connect the electrical connector to the solenoid valve (1).