Canister Purge Control Valve: Service and Repair

EVAP Solenoid And Vacuum Switch:

[1][2]EVAP Purge Vacuum Switch Replacement

Removal Procedure

Notice: Numbers in text correspond to numbered components in image.

1. Disconnect the electrical connector.

2. Remove the vacuum lines (4) from the EVAP vacuum switch (3) and the EVAP vacuum control solenoid (1).

3. Remove the EVAP vacuum switch (2) from the bracket (4).

Installation Procedure

1. Install the New EVAP vacuum switch (2) to the bracket (4).

2. Connect the vacuum lines (4) to the EVAP vacuum switch (3) and the EVAP vacuum control solenoid (1).

3. Connect the electrical connector.