Rear Door Window Regulator

Remove or Disconnect

1. Rear side door trim. Refer to "Rear Side Door Trim".

2. Rear side door armrest support by drilling out rivets.

3. Rear side door water deflector by peeling away from door.

Caution:
Tape rear side door window to rear side door frame. If rear side door window drops into rear side door personal injury or rear side door window damage may result.

4. Support rear side door window in the position needed to access regulator-to-window sash rivets, by taping window to door frame using a cloth backed tape.

5. Rear side door locking system module. Refer to "Rear Side Door Locking Module".

6. Rear side door window regulator-to-window sash rivets using a 5/16 inch drill bit.

7. Bolts securing regulator cam to door inner panel.

8. Window regulator electrical connector, if power window regulator.

9. Window regulator-to-door rivets.

10. Window regulator reinforcement, if manual window regulator.

11. Window regulator from door.

^ The window regulator and motor are serviced as a unit.

Install or Connect

1. Window regulator to door.

2. Window regulator reinforcement, if manual window regulator.

3. Window regulator-to-door rivets.

4. Window regulator electrical connector, if power window regulator.

5. Bolts securing window regulator cam to door inner panel.

6. Rear side door window regulator-to-sash rivets.

7. Rear side door locking system module. Refer to "Rear Side Door Locking System Module".

8. Remove tape securing window to door frame.

9. Rear side door water deflector.

10. Armrest support and rivets.

11. Rear side door trim. Refer to "Rear Side Door Trim".