Left Side

Catalytic Converter:

Exhaust Pipe:

REMOVE OR DISCONNECT
1. Raise and suitably support vehicle.
2. Heated oxygen sensor electrical connector and disconnect rosebud clip from bracket above starter motor.
3. Heated oxygen sensor from left side catalytic converter (1).
4. Nuts (5) attaching catalytic converter (1) to exhaust manifold.
5. Bolts/screws (8) attaching left side catalytic converter (1) to right side catalytic converter (2).
6. Left side catalytic converter (1) from vehicle.

INSTALL OR CONNECT
1. Left side catalytic converter (1) to vehicle.
2. Bolts/screws (8) attaching left side catalytic converter (1) to right side catalytic converter (2).
- Tighten Catalytic converter bolts/screws (8) to 25 Nm (18 lb ft).
3. Nuts (5) attaching left side catalytic converter (1) to exhaust manifold.
- Tighten Exhaust crossover pipe nuts (5) to 35 Nm (26 lb ft).
4. Heated oxygen sensor to catalytic converter.
- Tighten Heated Oxygen sensor to 42 Nm (31 lb ft).
5. Electrical connector and attach rosebud clip to bracket above starter motor.
6. Lower vehicle.