Exhaust Manifold: Service and Repair

Fig. 3 Alternator Assembly:

Fig. 8 Exhaust Manifold Replacement:

1. Disconnect battery ground cable.
2. Disconnect oxygen sensor.
3. Loosen drive belt tensioner and remove drive belt.
4. Remove alternator, Fig. 3.
5. Raise and support vehicle.
6. Disconnect exhaust pipe from manifold.
7. Lower the vehicle.
8. Remove eight exhaust manifold retaining bolts, Fig. 8.
9. Remove oil filler tube.
10. Remove exhaust manifold and gasket.
11. Reverse procedure to install noting the following:
a. Install exhaust manifold with new gasket. Refer to Fig. 8 for torque values.
b. When installing alternator, refer to Fig. 3 for torque values.
c. When installing serpentine drive belt, refer to Engine/Drive Belts, Mounts, Brackets and Accessories/Drive Belt/Specifications/Mechanical.