Caliper Assembly

1. Install cap onto bleeder valve, then install bleeder valve into caliper.
2. Using clean brake fluid, lubricate piston seals, then install seals into caliper bore grooves. Ensure seals are not twisted during installation.
3. Using clean brake fluid, lubricate caliper bores and piston assemblies.
4. Install boot over end of piston. Place piston into caliper bore, then push downward until fully bottomed in bore. Ensure boot is properly seated into groove around piston and into groove in caliper bore.
5. Repeat step 4 for remaining piston.
6. Install shoes and linings as outlined further on, then bleed brake system.