E.Preparation For Shipping

Drain and measure the oil from the removed unit. Record the results on the complaint form. Replace the drain plug.

Remove all plastic shipping plugs and covers from the exchange unit and install them on the unit to be returned.

Complete the information on the complaint tag. Refer to the Identification Tag explanation chart.

Fold the report form, staple it to the complaint tag and secure the tag to a clutch housing bolt hole of the unit to be returned. Fold and staple the leak identification forms to the same tag.

Write the authorization number on the case cover on the unit to be returned.

Repack the return unit into the exchange shipping container.

Place the shipping label on the exchange shipping container.