To Remove Customer's Code

B. TO REMOVE CUSTOMER'S CODE-Deactivate Theft Deterrent From Unlocked Mode, Deterrent Activated.


1. With the radio off, hold in presets 1 and 4 for about 4 seconds until the display changes to

SEC. "SEC"
IMPORTANT: If the display changes to "--", the theft deterrent is already deactivated.

2. Press the set button "000"

3. Set the first digit (0-9) of your
code with the seek button. "100"

4. Set the next two digits (0-99) of your
code with the scan button. "123"

5. Press the am-fm button to enter the first
three digits. "000"

6. Again, use seek to set the 4th digit
(0-9) of your code. "400"

7. Set the last two digits (0-99) of your code
with the scan button. "456"


8. Press the am-fm button to enter the last
3 digits of your code. "1:00"

Theft deterrent is deactivated and "--" then "--"
clock is displayed "1:00"