Rear Suspension

Cover Beam to Body 110-130 Nm (81-95 lb ft)
Support Beam to Diff. Carrier 70-90 Nm (51-66 lb ft)
Support Beam to Transmission 65-75 Nm (47-55 lb ft)
Trunnion Straps at Side Gear Yoke 30-40 Nm (22-29 lb ft)
Trunnion Straps at Spindle Yoke 30-40 Nm (22-29 lb ft)
Spindle to Hub and Bearing 205-240 Nm (151-177 lb ft)
Hub and Bearing to Knuckle 80-100 Nm (59-73 lb ft)
Dust Shield to Backing Plate 8-12 Nm (6-9 lb ft)
Shock Absorber Stud to Knuckle 70-90 Nm (51-66 lb ft)
Shock Absorber to Body 55-70 Nm (40-51 lb ft)
Shock Absorber to Knuckle 75-100 Nm (55-73 lb ft)
Control Arms to Body 75-95 Nm (55-70 lb ft)
Control Arms to Knuckle 170-210 Nm (125-154 lb ft)
Jounce Bumper to Body 40-54 Nm (29-39 lb ft)
Cam Bolt to Support Rod 215-290 Nm (158-213 lb ft)
Support Rod to Knuckle 130-160 Nm (95-118 lb ft)
Support Rod Bracket to Diff. Carrier 65-85 Nm (47-62 lb ft)
Tie Rod End to Knuckle 40-50 Nm (29-36 lb ft)
Tie Rod End Locking Nut 54-72 Nm (39-53 lb ft)
Tie Rod Housing to Cover Beam 64-84 Nm (47-61 lb ft)
Stabilizer Bar to Body 20-30 Nm (14-22 lb ft)
Stabilizer Link to Bracket and Bar 35-48 Nm (25-35 lb ft)
Stabilizer Link Bracket to Knuckle 20-30 Nm (14-22 lb ft)
Transverse Spring to Cover Beam 40-60 Nm (29-44 lb ft)
Transverse Spring Link Bolt to Knuckle: Install nut to expose hole. Then insert cotter pin.