Transmission Fluid Cooler Hose/Pipe Quick Connect Fitting

Transmission Fluid Coolr Hose/Pipe Quick-Connect Fitting Disconnection and Connection

Removal




1. Install the J 41623-B tool onto the transmission oil cooler (TOC) pipe.




2. Slide the J 41623-B toward the TOC pipe fitting.




Important: Rotate the J 41623-B to engage the TOC pipe fitting's retain slots.

3. Connect the J 41623-B onto the TOC pipe fitting.




4. Rotate the J 41623-B until the retainer clip (1) rises above the fitting retainer seat.




5. Pull back on the TOC pipe to disengage the pipe from the TOC pipe fitting.
6. Remove the J 41623-B from the TOC pipe.

Installation




Important: Inspect the TOC pipe fitting and retaining clip for signs of wear or damage. Replace the components if necessary.

1. Install the TOC pipe into the TOC pipe fitting. A distinct snap should be heard or felt when assembling the TOC pipe to the fitting.
2. To ensure the cooler line is properly installed,give the cooler pipe a gentle pull.