Engine Mount Strut Replacement - Right

Engine Mount Strut Replacement - Right

Removal Procedure





1. Remove the surge tank nuts and push pin retainer.
2. Remove the surge tank from the studs and position the tank aside.





3. Remove the engine mount strut brace bolt and nut.
4. Remove the engine mount strut brace.





5. Remove the engine mount strut bolt.
6. Remove the engine mount strut.

Installation Procedure





1. Install the engine mount strut.

Notice: Refer to Fastener Notice in Service Precautions.

2. Install the engine mount strut bolt.
Tighten the bolt to 70 Nm (52 ft. lbs.).





3. Install the engine mount strut brace.
4. Install the engine mount strut brace bolt and nut.
^ Tighten the bolt to 50 Nm (37 ft. lbs.).
^ Tighten the nut to 70 Nm (52 ft. lbs.).





5. Position the surge tank to the studs.
6. Install the surge tank nuts and push pin retainer.
Tighten the nuts to 6 Nm (53 inch lbs.).