Throttle Body Assembly Replacement

THROTTLE BODY ASSEMBLY REPLACEMENT

REMOVAL PROCEDURE
- Turn the ignition OFF.
- Remove the air cleaner intake duct.




- Remove the throttle body electrical connector.




- Unlock and reposition the wiring harness conduit.




- Remove the throttle body bolts.
- Remove the throttle body and gasket.

INSTALLATION PROCEDURE
- Carefully clean the throttle body mounting surfaces of any gasket and/or seal material.




- Install the throttle body and NEW gasket.
- Install the throttle body bolts.

NOTE: Refer to Fastener Notice.

Tighten the throttle body bolts to 10 N.m (89 lb in).




- Install the wiring harness conduit.




- Install the throttle body electrical connector.
- Install the air cleaner intake duct.
- Perform the idle learn procedure. Refer to Idle Learn.
- Use the scan tool to clear all DTCs.