Solenoid and Wiring Harness

SOLENOID AND WIRING HARNESS 4T60-E

Solenoids And Wiring Harness.:

REMOVE OR DISCONNECT
1. Case side cover.
2. Clips retaining solenoid.
3. Solenoid harness connector and solenoid.

INSTALL OR CONNECT
1. Solenoid harness connector and solenoid.
2. Retaining clips.
3. Case side cover, new gaskets and attaching bolts.

- Tighten Case side cover bolts to 9 to 13 Nm (80 to 115 in lb).
- Adjust Fluid level.