Installation

For additional information see Notes, Warnings, and Hints. Fundamentals and Basics

Installing Wheel Cylinder Retainer:

Wheel Cylinder:

1. Position wheel cylinder assembly (28) and hold in place with wooden block between cylinder and axle flange.
2. Install new retainer (21) over wheel cylinder abutement using a 1-1/8 inch 12-point socket (33) and socket extension (32) or install wheel cylinder bolts and torque to 20 Nm (15 lbs. ft.).
3. Install inlet tube line and nut.
^ Torque inlet tube nut to 17 Nm (13 lbs. ft.).
4. Bleed the brake system.