Fan Shroud: Service and Repair

Fan shroud Replacement
Removal Procedure





1. Remove the fan.
2. Lower the vehicle.
3. Disconnect the condenser tube from the fan shroud retainer clip.
4. Remove the cooling fan shroud retaining bolts.
5. Remove the cooling fan shroud.

Installation Procedure





1. Install the cooling fan shroud.
2. Install the cooling fan shroud retaining bolts.
Tighten the bolts to 6.5 Nm (58 inch lbs.).

Notice: Refer to Fastener Notice in Service Precautions.

3. Connect the condenser tube to the fan shroud retainer clip.
4. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle.
5. Install the fan.