Defroster Duct Replacement - Windshield
DEFROSTER DUCT REPLACEMENT - WINDSHIELDREMOVAL PROCEDURE
1. Remove the IP carrier.
2. Remove the defroster duct retaining screws (1,2).
3. Remove the defroster duct nut at the front of dash (3).
4. Remove the defroster duct.
INSTALLATION PROCEDURE
1. Install the defroster duct.
2. Install the defroster duct attaching screws (1,2).
NOTE: Refer to Fastener Notice in Service Precautions.
Tighten
Tighten the screws to 1.4 N.m (12 lb in).
3. Install the defroster duct mounting nut (3) to the front of dash.
Tighten
Tighten the nut to 9 N.m (80 lb in).
4. Install the IP carrier.