Zone 5

1. Remove the key from the ignition.
2. Connect the I/P module connector.
3. Install the CPA into the I/P module connector located to the right of the steering column.






4. Install the LH insulator panel.






5. Install the SIR Fuse.
6. Install the I/P fuse block cover.
7. Staying well away from all inflator modules, turn ON the ignition.
7.1. The AIR BAG indicator will flash 7 times.
7.2. The AIR BAG indicator will then turn OFF.
8. Perform Diagnostic System Check - Restraint Systems if the AIR BAG indicator does not operate as described.