Zone 3

1. Remove the key from the ignition.
2. Connect the steering wheel module coil connector.
3. Install the CPA from the inflatable restraint steering wheel module coil connector located at the base of the steering column.






4. Install the LH insulator panel.






5. Install the SIR Fuse.
6. Install the I/P fuse block cover.
7. Staying well away from all inflator modules, turn ON the ignition.
7.1. The AIR BAG indicator will flash seven times.
7.2. The AIR BAG indicator will then turn OFF.
8. Perform Diagnostic System Check - Restraint Systems if the AIR BAG indicator does not operate as described.