2-3 Shift Solenoid Valve

2-3 Shift Solenoid Valve Replacement
Removal Procedure
1. Remove the case side cover.
2. Disconnect the transaxle wiring harness.







3. Using a small screwdriver or pick, remove the 2-3 shift solenoid valve retainer (314C) from the control valve body (301).
4. Remove the 2-3 shift solenoid valve (315B) from the control valve body (301).
5. Remove the O-ring seal (316) from the 2-3 shift solenoid valve (315B) ONLY if it is damaged.



Installation Procedure







1. Install a new O-ring seal (316) onto the 2-3 shift solenoid valve (315B), if it was removed.
2. Install the 2-3 shift solenoid valve (315B) into the control valve body (301).
3. Install the 2-3 shift solenoid valve retainer (314C) into the control valve body (301).
4. Connect the transaxle wiring harness.
5. Install the case side cover.