Service Port HVAC: Service and Repair
SERVICE PORTS REPLACEMENTTOOLS REQUIRED
J 39400-A Halogen Leak Detector
REMOVAL PROCEDURE
1. Recover the refrigerant.
2. Remove the service fitting from the line.
INSTALLATION PROCEDURE
1. Lubricate the O-ring using 525 refrigerant oil.
2. Install the service fitting to the line.
NOTE: Refer to Fastener Notice in Service Precautions.
Tighten
Tighten the fitting to 12 N.m (9 lb ft).
3. Evacuate and recharge the A/C system.
4. Leak test the component fittings using the J 39400-A.