2-3 Shift Solenoid Valve Replacement

2-3 SHIFT SOLENOID VALVE REPLACEMENT

Removal Procedure

1. Remove the case side cover. Control Valve Body Cover Replacement

2. Disconnect the 2-3 shift solenoid electrical connector.







3. Remove the 2-3 shift solenoid (315B).

Installation Procedure







1. Install the 2-3 shift solenoid (315B).

2. Connect the 2-3 shift solenoid electrical connector.

3. Install the case side cover. Control Valve Body Cover Replacement

Important: It is recommended that transmission adaptive pressure (TAP) information be reset. Resetting the TAP values using a scan tool will erase all learned values in all cells. As a result, The ECM, PCM or TCM will need to relearn TAP values. Transmission performance may be affected as new TAP values are learned.

4. Reset the TAP values. Adapt Function