Fuel Pressure Release: Service and Repair

FUEL PRESSURE RELIEF PROCEDURE

TOOLS REQUIRED
J 34730-1A Fuel Pressure Gage




1. Disconnect the negative battery cable.
2. Remove the fuel injector sight shield.




3. Connect J 34730-1A to the fuel pressure connection. Wrap a shop towel around the fuel pressure connection while connecting the J 34730-1A in order to avoid spillage.
4. Install the bleed hose into an approved container and open the valve to bleed the fuel system pressure. The fuel connections are now safe for servicing.
5. Drain any fuel remaining in the J 34730-1A into an approved container.