Battery Negative Cable Disconnect/Connect Procedure

REMOVAL PROCEDURE




1. Turn OFF all the lamps and accessories.
2. Make sure the ignition switch is OFF.
3. Remove the negative battery cable from the battery.

INSTALLATION PROCEDURE

NOTE: Refer to Fastener Notice in Service Precautions.

IMPORTANT: Clean any existing oxidation from the contact face of the battery terminal and battery cable using a wire brush before installing the battery cable to the battery terminal.




Connect the negative battery cable to the battery.

Tighten
Tighten the battery ground (negative) terminal bolt to 17 N.m (13 lb ft).

The radio incorporates electronic memory for the clock and pre-selected radio stations, reprogramming is not necessary.