Headlamp Aiming (Mechanical Method)

TOOLS REQUIRED
J 25300-203 Composite Headlamp Aimer Adapter Instructions for use accompany the tool.

You may use this procedure only on headlamps equipped with aiming pads. Adjustment settings are embossed on the headlamp lens. These settings are typically located near the aiming pads. In some cases, the adjustment settings are located in other areas of the lens. The settings are represented by a number followed by the letter V or the letter H.
1. Remove any snow, ice or mud from the vehicle.
2. The vehicle should be fully assembled and all other work stopped while the headlamp aiming is being done.
3. The vehicle should contain cargo or be loaded in order to represent normal vehicle use.
4. The tires should be properly inflated.
5. Rock the vehicle in order to stabilize the suspension.
6. Using the J 25300-203, adjust the headlamps to the specifications required by state or provincial authorities.