Brake Pressure Modulator Valve (BPMV) Bracket Replacement

Brake Pressure Modulator Valve (BPMV) Bracket Replacement
Removal Procedure





1. Raise the vehicle. Refer to Vehicle Lifting.
2. Remove the left front wheel.
3. Remove the left front fascia extension.
4. Remove the front air deflector.
5. Remove the 2 brake pressure modulator valve (BPMV) bracket nuts (2).





6. Remove the 3 BPMV bracket to frame bolts (2).
7. Remove the BPMV bracket (1) from the frame (3).

Installation Procedure





1. Install the BPMV bracket (1) to the frame (3).

Notice: Refer to Fastener Notice in Service Precautions.

2. Install the 3 BPMV bracket to frame bolts (2).
^ Tighten the 3 bolts to 12 Nm (106 inch lbs.).





Important: Make sure that all 3 rubber isolators are installed on the BPMV. The isolators protect the EBCM/BPMV assembly from vehicle vibrations.

3. Install the EBCM/BPMV assembly (1) to the BPMV bracket (3).
4. Install the 2 BPMV bracket nuts (2).
^ Tighten the 2 nuts to 10 Nm (89 inch lbs.).
5. Install the left front fascia extension.
6. Install the front air deflector.
7. Install the left front wheel.
3. Lower the vehicle. Refer to Vehicle Lifting.