W/O DO7

REMOVAL PROCEDURE




1. Remove the left side sound insulator. Refer to Closeout/Insulator Panel Replacement - Left in Instrument Panel, Gauges and Warning Indicators.
2. Remove the right side sound insulator. Refer to Closeout/Insulator Panel Replacement - Right in Instrument Panel, Gauges and Warning Indicators.
3. Remove the air distributor duct screws (1,2). Due to the difficulty in the removal of the right side screw (2), it will not be necessary to install upon reassembly.
4. Remove the air distributor duct.

INSTALLATION PROCEDURE




1. Install the air distributor duct.

NOTE: Refer to Fastener Notice in Service Precautions.

2. Install the left side screw (1) Ensure that the right side tab is seated properly.

Tighten
Tighten the screw to 1.4 N.m (12 lb in).

3. Install the left side sound insulator. Refer to Closeout/Insulator Panel Replacement Left in Instrument Panel, Gauges and Warning Indicators.
4. Install the right side sound insulator. Refer to Closeout/Insulator Panel Replacement - Right in Instrument Panel, Gauges and Warning Indicators.

"For a description of the RPO Code(s) shown in this article or any of the images therein, refer to the RPO Code List found at Vehicle/Application ID". RPO Codes