Evaporative Emission Control Canister: Service and Repair

REMOVAL PROCEDURE

CAUTION: Refer to Caution in Cautions and Notices.




1. Raise the vehicle.
2. Mark the hoses for installation on the EVAP canister.
3. Remove the [1][2]EVAP vent hose (1).
4. Remove the fuel tank vapor hose (2).
5. Remove the purge hose (3).




6. Remove the nuts (2) from the EVAP canister.
7. Remove the EVAP canister (1) from the bracket by releasing tabs.

INSTALLATION PROCEDURE




1. Install the EVAP canister on the bracket.
2. Install the EVAP canister assembly into the vehicle.

NOTE: Refer to Fastener Notice in Cautions and Notices.

3. Assemble the EVAP canister to the underbody with the 3 nuts.

Tighten
Tighten the EVAP Canister nuts to 9 N.m (80 lb in).




4. Install the purge hose (3) to the EVAP canister.
5. Install the fuel tank vapor hose (2) EVAP canister.
6. Install the vent hose (1) to the EVAP canister
7. Lower the vehicle.