Vacuum Fluorescent (VF) Information

Heater And A/C Control Assembly:

DISPLAY PANEL
The Vacuum Fluorescent (VF) panel provides system operating information for the driver. A 3-digit temperature readout is located near the center of the display. With the system in OFF mode, the outside temperature is displayed continuously.

The driver may display the current temperature setting by selecting any mode except OFF or adjusting the temperature control.

The current temperature setting displays for 5 seconds.

The display then returns to the outside temperature.

SYMBOLS
The following arrows appearing in the center of the display indicate the air discharge location relative to the seat:
^ An upper (windshield) discharge arrow
^ A lower (floor level) discharge arrow
^ A middle (instrument panel) discharge arrow

Either one or a combination of these discharge arrows may be illuminated, depending on the current system operating mode. If the system is turned OFF, the area is blank and the display returns to the outside temperature reading.

The driver may display the current temperature setting by selecting any mode except OFF or adjusting the temperature control.