Front Console Replacement

REMOVAL PROCEDURE
1. Remove the console storage bin.
2. Remove the 2 front fasteners (3) that connect the console assembly to the floor.
3. Move the front seats to the full forward position.
4. Remove the 2 rear side fasteners (2) that connect the console assembly to the floor.
5. Lift the console assembly (1).
6. Disconnect the electrical connector.
7. Remove the console assembly (1).

INSTALLATION PROCEDURE
1. Connect the electrical connector.
2. Align the console assembly (1) to the floor mounting holes.

NOTE: Refer to Fastener Notice in Cautions and Notices.

3. Install the fasteners (2,3) to the console assembly.
Tighten
Tighten the fasteners to 10 N.m (89 lb in).

4. Install the console storage bin.