Wiper Motor Cover Replacement

Wiper Motor Cover Assembly Replacement:

Remove or Disconnect
1. Negative battery cable.
2. Electrical connectors from cover assembly (14) and wiper motor (15).
3. Three screws (13).
4. Cover assembly.

Install or Connect

NOTICE: Refer to Service Precautions.

1. Cover assembly (14).

Important
^ Always install cover assembly with wiper motor (15) in park position and drive pin in the open area of the cam.

2. Three screws (13).

Tighten
^ Screws (13) to 2 N.m (18 lb. in.).

3. Electrical connectors.
4. Negative battery cable.