Wiper Motor Cover Replacement

Description:

Remove or Disconnect
1. Wiper arm assemblies from vehicle.
2. Air inlet screen assembly from vehicle.
3. Connector (16) from wiper motor assembly (17).
4. Wiper transmission assembly (18) from wiper motor crank arm assembly (19) using tool J 39232.
5. Three screws (20) and wiper drive system module (21) from vehicle.
6. Three screws (32) and pulse circuit board and cover assembly (33) from wiper motor assembly (17).

Install or Connect

NOTICE: Refer to Service Precautions.

1. Pulse circuit board and cover assembly (33) on wiper motor assembly (17) with three screws (32).

Tighten
^ Screws to 2 N.m (18 lb. in.).

2. Wiper drive system module (21) on vehicle with three screws (20).

Tighten
^ Screws to 10 N.m (88 lb. in.).

3. Wiper transmission assembly (18) on wiper motor crank arm assembly (19) using tool J 39529.
4. Connector (16) to wiper motor assembly (17).
5. Air inlet screen assembly on vehicle.
6. Wiper arm assemblies on vehicle.
7. Operate wipers and check for proper operation.