Right Side

REMOVAL
1. Raise vehicle and suitably support.
2. Support exhaust pipe and right hand muffler.





3. Cut exhaust pipe at right hand muffler in front of weld. Cut must be made as close to the right hand muffler as possible to ensure adequate overlap for clamping.
4. Hangers from muffler.





5. Tailpipe from muffler (if equipped).
6. Muffler.

INSTALLATION





1. Exhaust pipe clamp to end of new right hand muffler. Do not tighten.
2. New right hand muffler and support.
3. Hangers to muffler.
4. Tailpipe to muffler (if equipped). Tighten
^ Exhaust pipe clamp nuts to 50 Nm (37 ft. lbs.).
^ Tailpipe clamp nuts to 35 Nm (26 ft. lbs.).
5. Lower vehicle.